The COMPRIMA 500 and COMPRIMA 600 feature powder feed by centrifugal force that minimizes product losses and ensures high production speeds, even with oblong or shaped tablets.
for plain or coated tablets The ATI is able to inspect 2500 tablets/min in a barrier system. Special camera stations inspect the top and bottom surface of the tablets or the cylindrical part of the capsules.
The single-sided Xpress 500 and double-sided Xpress 700 feature mpower integrated technology control which simplifies and expedites press setup times. The Xpress line features a stepped cabinet design for fast, easy and thorough cleaning procedures.
various capacities Company offers coating pans in capacities from 20 up to 2300 liters. All models can process tablets and pellets, and can perform aqueous, organic solvent film and sugar coating. Switching from one process to the other is easy.
with perforated pans Company offers complete tablet coating systems with perorated pans. Lab coating systems can incorporate three to four interchangeable pans.
for batch coating of low-dosage, high-potency, and hazardous compounds The Accela-Cota Spectrum has lower bed depths and extended spray zones for coating uniformity. Loading, coating, unloading, and cleaning are contained. The machine can process from 100 to 1000L.
medium to high-speed The Easy-Tab 3000 Tablet Press is engineered to produce high quality tablets for many diverse applications. The Easy-Tab 3000 is a medium to high speed single sided tablet press offering precompression (1 ton) and final compression (up to 10 tons).
Fully contained wash-in-place (WIP) tabletting system is suitable for any facility requiring dust control combined with faster and easier changeover and cleaning.
byJim Gifford They cross the border at night and in broad daylight, singly and by the busload, not in the wilderness but at international airports and checkpoints on major highways. They know they will not be denied. Governors and congressional representatives encourage them. They are U.S.
Louis F. Szabo, Meriam Process Technologies What's the difference between using an RTD sensor to measure temperature and a thermocouple? One plant found out the answer was $2 million. That was the fine imposed by the U.S. Food and Drug Administration after a plant inspection.
Company has introduced a process control system specifically designed for the freeze drying process using the T800 Visual Supervisor. The freeze drying process is used in regulated industries and extracts dry product from an aqueous solution.
Custom shaft seals completely contain dry powders and bulk solids in dryers and other rotating equipment, where traditional packings fail to seal. Seals are available fully-split to simplify and speed installation and maintenance without disturbing the bearing or drive assembly.
Conical mixers and dryers offer high mixing accuracy and low shear force to the products being mixed, while requiring low energy consumption, and the ability for variable volume filling down to 20% of overall volume design on powders, pastes and slurries.
The Delumper 2085L Crusher utilizes specially designed, individually replaceable teeth mounted on a smooth rotating drum, which intermeshes with sizing combs. Solids are reduced to their basic grain size without overgrind, heat rise or fines.
This cake drying device is constructed with polypropylene membrane filter plates which can be retrofitted for existing presses. This drying system is available in both side bar and overhead beam designs for semi-automatic or fully automatic presses.