 |
| |
 
 Email
for more information
Company's
other products
Email
to a colleague
See
similar products
Printer
friendly format
|
|
Bimetal Temperature Sensor Provides Local Readout
Bimetal Dual-Mode Remote Thermometer provides on-site indication of process temperature conditions, and simultaneously provides a mV or ohm signal proportional to temperature for input to a transmitter, Remote Terminal Unit (RTU), controller, recorder, indicator, PLC, DCS or SCADA system. Unit requires no power supply at the point of measurement. It includes a rugged thermowell probe assembly that contains an RTD or thermocouple sensor, and a large analog display. Both the sensor and display are NIST traceable, and can be quickly calibrated in the field. No source of power is needed to drive the local analog readout; the thermocouple or RTD can be read via a standard transmitter, signal conditioner or analog input device. The sensor’s easy-to-read three-inch dial provides local temperature indication in 0-250°F and 0-500°F dial ranges, is hermetically sealed per ASME B40.3, and has field-adjustable calibration. The dial gauge has NIST traceable calibration of up to 1% of reading.
Moore Industries-International, Inc.
16650 Schoenborn St.
North Hills, CA, 91343
|
|
|
|
|
