Advertisement
MILLS, laboratory

Pin Mill

March 3, 2014 5:31 pm | by Nikita Ernst, Associate Editor | Munson Machinery Company, Inc. | Product Releases | Comments

A new 24-inch (610 mm) diameter Pin Mill model CIM-24-MS grinds, sizes, de-agglomerates and homogenizes friable or other materials into controlled particle sizes, from coarse to fine (400 mesh).

LISTED UNDER: Lab Instrumentation & QA/QC | Process Equipment/Lab Scale | MILLS, laboratory

Ultrasonicator UP100H

April 18, 2013 3:36 am | Hielscher Ultrasonics GmbH | Products

The ultrasonic processor UP100H (100W, 30kHz) is the perfect device for the sonication of small and medium size lab samples. This compact, yet powerful, lab homogenizer is commonly used for sample preparation, such as emulsifying, dispersing, dissolving and cell disruption.

LISTED UNDER: BLENDERS, laboratory | MILLS, laboratory | MIXERS, lab

Ultrasonic Lab Homogenizer UP200Ht

April 17, 2013 11:56 am | Hielscher Ultrasonics GmbH | Products

The UP200Ht (200W, 26kHz) is part of the new series of Hielscher’s 200 watt ultrasonic homogenizers which come with broad range of new accessories.Typical applications for this powerful ultrasonic device are homogenization, dispersing, emulsification, disintegration, cell disruption, degassing or sonochemistry.

LISTED UNDER: MILLS, laboratory | MIXERS, lab | GRINDERS
Advertisement

Ultrasonic Homogenizer UIP2000hdT

April 17, 2013 11:51 am | Hielscher Ultrasonics GmbH | Products

The ultrasonic processor UIP2000hd (20kHz, 2000W) is a powerful and adaptable ultrasonic device for the industrial processing of liquids. It is used for applications, such as emulsification, dispersing & particle fine milling, lysis & extraction or homogenizing.

LISTED UNDER: HOMOGENIZERS | BLENDERS, laboratory | MILLS, laboratory

Jet Mill

April 12, 2013 3:21 pm | Product Releases | Comments

The Micronizer® utilizes a unique fluid energy grinding system to generate particle-on-particle impact. The jet mill grinds and classifies powders to micron and sub-micron sizes in a single grinding chamber using compressed air or gas.

LISTED UNDER: MILLS, laboratory | Milling Equipment | MILLS, fluid energy

Toothed Colloid Mill

March 18, 2013 8:22 am | Pharmaceutical Processing | Product Releases | Comments

The toothed colloid mills in the MZ series are FrymaKoruma’s response to the increased demands in all industrial sectors with regard to flexibility and hygiene management. With its innovative design, the technology is suited for wet grinding pharmaceutical, cosmetic and chemical applications of almost any viscosity.

LISTED UNDER: MILLS, colloid | MILLS, laboratory

Toothed Colloid Mill

August 2, 2012 8:57 am | Pharmaceutical Processing | Product Releases | Comments

The toothed colloid mills in the MZ series assure each product is milled to the correct size. The technology is suited for wet grinding pharmaceutical applications of almost any viscosity.

LISTED UNDER: Milling Equipment | MILLS, laboratory

Economical Size Reducers

July 20, 2012 10:35 am | Pharmaceutical Processing | Product Releases | Comments

Gericke Nibblers provide an economical alternative to hammer mills and more complex equipment for consistent size reduction of materials and agglomerates.

LISTED UNDER: Blending/Granulating Equipment | Process Components, Supplies and Instrumentation | MILLS, laboratory
Advertisement

Free-Standing Ductless Fume Hoods

May 9, 2012 1:51 pm | Pharmaceutical Processing | Product Releases | Comments

E-Series free-standing polypropylene ductless fume hoods are capable of enclosing equipment up to 52 inches tall.

LISTED UNDER: Clean Room Equipment & Supplies | Clean Room Equipment & Supplies | Process Components, Supplies and Instrumentation

Ultra-High Shear Mixer

April 24, 2012 9:07 am | Pharmaceutical Processing | Product Releases | Comments

The X-Series ultra-high shear mixer is ideal for products that require great uniformity in a dispersion or emulsion.

LISTED UNDER: Milling Equipment | MILLS, laboratory

Shaker Mixer for Difficult Powders

March 14, 2012 11:22 am | Pharmaceutical Processing | Product Releases | Comments

The Turbula® Shaker Mixer gives an exceptionally uniform mix of difficult free-flowing powders.

LISTED UNDER: Milling Equipment | MILLS, laboratory

Truly Sanitary Tubing

February 7, 2012 11:35 am | Pharmaceutical Processing | Product Releases | Comments

From raw material selection to polishing and packaging, all of the company’s truly sanitary tubing is manufactured with surface finish consistency and outstanding corrosion resistance.

LISTED UNDER: Piping, Tubing, Fittings | Process Components, Supplies and Instrumentation | MILLS, laboratory

Containment Valves Offer Safe API Transfer

July 26, 2011 12:34 pm | Pharmaceutical Processing | Product Releases | Comments

With ChargePoint® DL split butterfly valve technology, the fast and secure transfer of larger quantities of ingredients in solid dose production is both more efficient and more economical.

LISTED UNDER: Valves | MILLS, laboratory

Extremely Efficient Planetary Mills

July 18, 2011 12:25 pm | Pharmaceutical Processing | Product Releases | Comments

The mills feature a time-saving premium grinding bowl locking-system, automatic checking of the locks in the mill, blocking in event of impermissible operating states, and a new automatic-shut-off function in event of an imbalance. 

LISTED UNDER: Milling Equipment | MILLS, laboratory

Versatile Grinding Mill for Hard-to-Grind Materials

June 20, 2011 12:49 pm | Pharmaceutical Processing | Product Releases | Comments

The PolarFit ultra-fine-grinding mill provides a cost-effective way to reduce hard-to-grind materials to smaller particle sizes.

LISTED UNDER: Milling Equipment | MILLS, laboratory

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading