Advertisement
Facility Equipment

Stainless Steel Levers

May 2, 2014 1:59 pm | by Nikita Ernst, Associated Press | J.W. Winco | Product Releases | Comments

Introducing GN 300.5 Threaded Stud Type All-Stainless Steel Adjustable Levers, in inch and metric sizes for applications in the food processing and chemical industries.

LISTED UNDER: Processing Equipment | Facility Equipment

Steel Hand Trolleys

January 22, 2014 12:43 pm | David Round Inc. | Product Releases | Comments

Introducing all-stainless steel hand geared trolleys with capacities from 1/2 ton to 5 tons for accurate load spotting to the pharmaceutical industry as well as others that require clean room material handling products.

LISTED UNDER: Facility Equipment | Material Handling

Contaminant Filtration System

January 7, 2014 4:24 pm | Airflow Systems, Inc. | Product Releases | Comments

The TH-280 Series of industrial air filtration systems is designed to provide high-efficiency, ambient filtration in manufacturing and processing environments.

LISTED UNDER: Dust Equipment | AIR POLLUTION CONTROL SYSTEMS | DUST COLLECTORS
Advertisement

Ductless Chemical Workstation

December 18, 2013 1:20 pm | Product Releases | Comments

The FE-2620 ductless economy chemical workstation provides a high level of operator protection while performing routine laboratory manipulations with liquid chemicals or powders.

LISTED UNDER: Work Stations | AIR POLLUTION CONTROL SYSTEMS

Zero-Level Post Lift

December 17, 2013 12:33 pm | Product Releases | Comments

Introducing the electric-hydraulic Zero-Level Post Lift, which can be customized to fit pallet jacks, industrial carts and even carts with narrow casters. 

LISTED UNDER: General Equipment | Facility Equipment

Vented Chemical Storage Cabinets

December 3, 2013 1:50 pm | Air Science Usa | Product Releases | Comments

The new Safestore Vented Chemical Storage Cabinets are suitable for storage of noxious or odorous chemicals. 

LISTED UNDER: REGULATORS, gas | Environmental Storage/Containment | BIOSAFETY CABINETS

High Containment Barrier System for APIs

November 13, 2013 3:42 pm | Product Releases | Comments

Specifically designed for handling hazardous products, these containment systems run at negative pressure to the surrounding room providing operator protection during the manual product handling process and environmental protection for the product by virtue of the standard ISO 7 classification inside the isolator.

LISTED UNDER: BARRIER ISOLATORS

Bag Discharger Dust Hood

November 12, 2013 4:57 pm | Flexicon Corporation | Product Releases | Comments

A new Dust Hood for Bulk Bag Dischargers contains spillage and dust that can escape through seams in the bag and folds in the spout. 

LISTED UNDER: Dust Equipment | AIR POLLUTION CONTROL SYSTEMS | DUST COLLECTORS
Advertisement

Dust Collector with Nozzle Improvements

September 24, 2013 1:45 pm | Product Releases | Comments

Company is offering the next generation of nozzle cleaning technology for reverse pulse jet dust collectors. Using the same amount of compressed air, the patented nozzle increases the cleaning velocity to supersonic flow.

LISTED UNDER: Dust Equipment | DUST COLLECTORS

Mist Collection and Filtration

September 18, 2013 1:46 pm | Product Releases | Comments

Designed specifically for oil mist, smoke, and fume collection, the Airflow Systems Model MPH10 mist collection and filtration system provides MERV 14 filtration efficiency. The MPH10 mist collector produces up to 1,000 CFM of air flow in industrial applications.

LISTED UNDER: FILTERS, air | AIR PURIFIERS

Bin Vent/Dust Collector

September 13, 2013 3:14 pm | Product Releases | Comments

The Modu-Kleen Series 250 bin vent/dust collector is designed to vent bins, storage silos, mixers, blenders, pneumatic conveying systems of any type, or any other device or process that must contain or control dust particles.

LISTED UNDER: Dust Equipment | DUST COLLECTORS

Tri-Flow

May 14, 2013 10:57 am | Tri-Mer Corp. | Products

Tri-Mer Corp. Tri-Flow is a filtration concept delivering HEPA-level performance with a MERV 16 rating. Tri-Flow Compact filters are a higher-performing alternative to bag, cartridge and pocket filters, which are typically MERV 10-13. They have a small footprint, and exceptionally large filter surface area: Tri-Flow Compact filters provide 2-3 times more filtration compared to similarly dimensioned bag (pocket) filters. The system uses seven proprietary media tailored to the application, including PMF (polyester with nanofiber overlay) and PTFE for high humidity applications. Media is pleated and bonded for dimensional stability.

LISTED UNDER: ENVIRONMENTAL CONTROL SYSTEMS | AIR POLLUTION CONTROL SYSTEMS

Collection Arm Provides Source-Point Removal of Dusts, Powders, Fumes, Smoke, and Other Particulates

February 14, 2013 10:42 am | Product Releases | Comments

The E-Z Arm High Flow series of contaminant extractors provides powerful, and efficient operation. Capable of handling air flow rates up to 1,500 CFM, the E-Z Arm extractor design delivers an energy consumption level of only 0.35 KW/hr at 800 CFM; 73% below a more typical level of 1.30 KW/hr at 800 CFM.

LISTED UNDER: Dust Equipment | DUST COLLECTORS

Screw Compressors

February 12, 2013 1:51 pm | Product Releases | Comments

The S series features a 5:6 screw profile of the rotors (five main rotor teeth and six secondary rotor teeth) that makes for low differential pressure between the chambers and so a minimum loss of volume flow. The small radius of the secondary rotor teeth means that the blow hole is as small as possible.

LISTED UNDER: BLOWERS

Dust Collection System

October 15, 2012 11:12 am | Product Releases | Comments

The DC Series high-volume dust collection system provides facility-wide collection and high-efficiency filtration of airborne dusts generated during bulk material processing and packaging operations.

LISTED UNDER: Facility Equipment

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading