Advertisement
Filter Housings

Bin Vent Filter

September 19, 2012 8:38 am | Product Releases | Comments

The Modu-Kleen Series 725 top removal bin vent filter allows vented discharge air to be exhausted but prevents any outside atmospheric air from entering the storage silo or surge bin.

LISTED UNDER: Filter Cartridges | Filter Housings | Filters

Capsule Filter Features Filling Bell Assembly

August 3, 2009 5:31 am | Product Releases | Comments

Capsule filters feature a filling bell assembly. The assembly guards against airborne contaminants when used with capsules to filter liquids into roller bottles, flasks, or other receptacles.

LISTED UNDER: Filter Housings

Tramp Iron Grate in Housings

September 8, 2008 6:48 am | Product Releases | Comments

These Tramp Iron Grate in Housings (TGH) incorporate Erium™ Ceramic, Rare Earth or Xtreme™ Rare Earth magnet material to remove ferrous contaminants from free flowing products as it cascades through rows of magnetic grates within a custom-manufactured housing.

LISTED UNDER: Filter Housings
Advertisement

Filter Housing Heaters Offer Adjustable Control Parameters

March 3, 2008 9:16 am | Product Releases | Comments

Series 48 heaters feature a unique temperature controller which combines a temperature process controller, a high-low temperature alert, and power switching with a safety high limit—all inside a NEMA 4X enclosure.

LISTED UNDER: Filter Housings

Filter Housings Offer Consistent Fit And Finish

April 4, 2007 8:17 am | Product Releases | Comments

The Series 26 Single Round Filter Housing is for application in a wide range of gas and liquid filtration in biopharmaceutical processes.

LISTED UNDER: Filter Housings

Filter Housing Heaters Cost-Effective Alternative To Steam Jackets

March 3, 2006 10:20 am | Product Releases | Comments

HPS® Series 46 Filter Housing Heaters are a cost-effective alternative to steam jackets for sterile vent filter housings. They are designed for processes that require tight temperature control, while complying with strict agency and corporate personnel safety standards.

LISTED UNDER: Filter Housings

Single-Round Housings Designed to Meet Varying Process And Geographic Requirements

March 30, 2005 5:58 am | Product Releases | Comments

The Series 3000 single-round housing line is a modular offering available in T-line, C-line and In-line configurations with a wide range of tube sizes, inlet/outlet and vent/drain connections.

LISTED UNDER: Filter Housings

Filter Housing Is Fully Drainable (2908)

March 30, 2005 5:58 am | Product Releases | Comments

Opti-Clean filter housings eliminate the collection chamber of conventional housings, and incorporates a specially machined, angled cartridge plate in the base which allows for complete drainage of any filtered and unfiltered product.

LISTED UNDER: Filter Housings
Advertisement

Prefilter Combines Benefits of Membrane and Depth Filters (2830)

March 11, 2005 4:38 am | Product Releases | Comments

The dual layer Protec RM0.5 is designed with an outer layer of glass fiber and an inner layer of hydrophilic PVDF membrane. This design combines the flow rates and high dirt-holding capacity of a glass medium with the precise particle retention of a membrane filter. The 0.

LISTED UNDER: Filter Housings

Sanitary Filter Housings Can Be Cleaned With Automated CIP

February 7, 2005 5:55 am | Product Releases | Comments

The Opti-Clean is a fully-drainable filter housing that can be cleaned with automated clean-in-place (CIP) technology.

LISTED UNDER: Filter Housings

In-Line Filters And Strainers Remove Unwanted Particles From Process Line Contents

November 9, 2004 6:27 am | Product Releases | Comments

In-line stainless steel filters and strainers are specifically designed for the removal of unwanted particles from process line content, providing added protection and longer service life for pumps, valves, heat exchangers and other processing equipment.

LISTED UNDER: Filter Housings

Filter Housing Is Fully Drainable (2254)

November 9, 2004 6:25 am | Product Releases | Comments

Opti-Clean filter housings eliminate the collection chamber of conventional housings, and incorporates a specially machined, angled cartridge plate in the base which allows for complete drainage of any filtered and unfiltered product.

LISTED UNDER: Filter Housings

Filter Housing Is Fully Drainable

April 7, 2004 11:58 am | Product Releases | Comments

Opti-Clean filter housings eliminate the collection chamber of conventional housings, and incorporates a specially machined, angled cartridge plate in the base which allows for complete drainage of any filtered and unfiltered product.

LISTED UNDER: Filter Housings

Duplex Strainers

January 21, 2004 11:18 am | Product Releases | Comments

for continuous flow, no-shut-down applications The Model 950 removes damage causing particulate matter sized from 1/2 inches down to 45 microns continuously.

LISTED UNDER: Filter Housings

Depth Cartridge Filters

April 14, 2003 8:54 am | Product Releases | Comments

new technology boosts filter life and dirt holding capacity Z.Plex filter technology produces filters with up to 100% greater filter life and dirt holding capacity than conventional melt blown depth filters at equivalent competitive efficiencies.

LISTED UNDER: Filter Housings

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading