Material Handling

Small Sanitary Rotary Airlock

February 25, 2015 12:43 pm | by DMN Incorporated | DMN Incorporated | Product Releases | Comments

The SAL sanitary airlock is a low capacity rotary airlock with a highly polished surface both on the inside and outside. The SAL is specifically designed for metering or dosing purposes in applications where very high hygienic standards as well as ease of operation and cleaning are required. Therefore, the SAL is very suitable for use in the pharmaceutical industry.


Container Liner

February 24, 2015 4:17 pm | Product Releases | Comments

Container liner is designed to protect freight and cargo being shipped in both 20’ and 40’ foot ocean containers as well as domestic 53 'ft long trucks.

LISTED UNDER: Material Handling

Sanitary Bulk Bag Filler with Metal Detection

November 21, 2014 10:47 am | Product Releases | Comments

This stainless steel, sanitary bulk bag filler detects and separates metal as it fills bulk bags by weight, dust-free. The filler frame is a patented TWIN-CENTERPOST™ design that maximizes strength, reduces cost and improves accessibility to bag hooks.


Bulk Bag Discharger with Flexible Screw Conveyor

November 11, 2014 2:19 pm | Product Releases | Comments

The Material Master™ Bulk Bag Discharging System is designed to discharge bulk bags into customer's existing process. Unit features an integral hoist, monorail, and the Spider-Lift™ bag lifting frame.


Drum Discharging System

October 8, 2014 2:00 pm | by Nikita Ernst, Associate Editor | Product Releases | Comments

Drum discharging system safely and efficiently empties drums of various materials into your process. 

LISTED UNDER: Processing Equipment | Material Handling

Capsule Filler

October 7, 2014 2:56 pm | by Nikita Ernst, Associate Editor | Product Releases | Comments

The new TEKNA Capsule Filler is a hybrid, combining a sampling of technologies from previous MG2 capsule fillers in one solution. 

LISTED UNDER: Encapsulation Equipment | Material Handling

Sanitary Bulk Bag Unloader

August 27, 2014 5:02 pm | by Nikita Ernst, Associate Editor | Product Releases | Comments

This bulk bag unloader system conditions and discharges various semi free-flowing, hygroscopic, contaminable powders at a rate of 8,000 lbs/hr, while feeding the powders to the end-of-line container filling system.


Pharmaceutical Feeders

August 21, 2014 4:29 pm | by Nikita Ernst, Associate Editor | Product Releases | Comments

This stainless steel pharmaceutical feeder is available in volumetric and gravimetric, single and twin-screw models.

LISTED UNDER: Material Handling

Flexible Screw Conveyor For Batching

June 20, 2014 1:00 am | by Nikita Ernst, Associate Editor | Hapman | Product Releases | Comments

Introducing a flexible screw conveyor that allows for batching of material within +/- 1 lb. or less of set point. 

LISTED UNDER: Conveyors | SCREW | Material Handling

Feeders Available in Four Models

May 7, 2014 9:02 am | Product Releases | Comments

The Model HD “High Deflection” Vibratory Feeder combines the higher deflection of up to 3/16-inch (4.8mm) and lower frequency (30 cps) advantages of a mechanical feeder with the trouble-free service of an electromagnetic feeder.

LISTED UNDER: Material Handling

Tubular Cable Conveyor

April 14, 2014 12:09 pm | by Nikita Ernst, Associate Editor | Flexicon Corporation | Product Releases | Comments

Introducing the FLEXI-DISC™ line of Tubular Cable Conveyors for fragile materials, integrated with upstream and/or downstream equipment that sources material from single or multiple locations.

LISTED UNDER: Material Handling

Servo-Drive Auger

April 14, 2014 11:39 am | by Nikita Ernst, Associate Editor | Spee-Dee Packaging Machiney | Product Releases | Comments

Fast delivery is just one of the many attributes the new servo-drive Revolution Series Auger is bringing to customers in the coffee, beverage, food, pharmaceutical and chemical industries.

LISTED UNDER: Packaging | Material Handling | AUGERS
The Monarch Model CMG28-12-PCR-X proppant Crush Test press meets critical demands of ISO 13502-2:2006 with excellent cycle repeatability.

Crush Test Press

February 6, 2014 1:55 pm | Carver, Inc. | Product Releases | Comments

The Monarch Model CMG28-12-PCR-X proppant Crush Test press meets critical demands of ISO 13502-2:2006 with excellent cycle repeatability.

LISTED UNDER: Material Handling | CRUSHERS

Automatic Tray Loading System

January 22, 2014 2:26 pm | Product Releases | Comments

Multi-lane tray loader for pharmaceutical vials can load up to 800 3ml vpm into cardboard or plastic trays with extremely low vial to vial impact.


Steel Hand Trolleys

January 22, 2014 12:43 pm | David Round Inc. | Product Releases | Comments

Introducing all-stainless steel hand geared trolleys with capacities from 1/2 ton to 5 tons for accurate load spotting to the pharmaceutical industry as well as others that require clean room material handling products.

LISTED UNDER: Facility Equipment | Material Handling


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.