Advertisement
Sampling Equipment

Compact Sample Storage Systems

June 17, 2014 1:00 am | by Nikita Ernst, Associate Editor | Product Releases | Comments

Introducing the BiOS® M and L, two compact, high-density automated systems designed to fit into existing laboratories that require ultra-low temperature storage of sensitive biological samples. 

LISTED UNDER: ENVIRONMENTAL ROOMS AND CHAMBERS | Sampling Equipment
The new Smart VacPrep is an advanced, high-throughput sample preparation system with six independently controlled ports.

Sample Preparation System

February 26, 2014 3:36 pm | by Nikita Ernst, Associate Editor | Micromeritics | Product Releases | Comments

The new Smart VacPrep is an advanced, high-throughput sample preparation system with six independently controlled ports.

LISTED UNDER: Sampling Equipment

Small Flask Clamp

November 7, 2013 11:11 am | LabStrong Corporation | Product Releases | Comments

This new device is designed to meet the demand for more flask clamp sizes suitable for holding a wider variety of sample sizes.

LISTED UNDER: Bioprocessing Equipment/Supplies | Sampling Equipment
Advertisement

Automated Aliquoting Liquid Handler Enhances Workflow

September 21, 2011 11:04 am | Product Releases | Comments

The CV2000™ automated aliquoting liquid handler is a newly developed, second-generation platform that enhances laboratory efficiency through workflow automation. It can accurately dispense liquid volumes from 100 to 875 µL and process up to 1,000 samples per hour.

LISTED UNDER: Lab Instrumentation & QA/QC | Material Handling | Sampling Equipment

Small Sample Process Viscometer with Temperature Control

January 20, 2011 5:50 am | Product Releases | Comments

The SPL-374 is designed for highly accurate and repeatable viscosity readings, clean-in-place simplicity and tight temperature control for small diameter process loops.

LISTED UNDER: Sampling Equipment

Sample Cooler Designed For WFI And Clean Steam Condensing

November 30, 2010 6:06 am | Product Releases | Comments

Sanicool Sample Coolers are designed for cooling of WFI or product sample and clean steam condensing.

LISTED UNDER: Sampling Equipment

Fluid Sampling System Designed For Single-Use Aseptic Applications

April 13, 2009 11:26 am | Product Releases | Comments

The GORE? STA-PURE? Fluid Sampling System for single-use aseptic applications is a fully disposable system for biopharmaceutical fluid sampling. It is delivered as a preassembled, pre-sterilized, closed system that incorporates an intuitive lever-valve actuator.

LISTED UNDER: Sampling Equipment

Fluid Sampling System Is Fully Disposable

April 13, 2009 11:26 am | Product Releases | Comments

The system eliminates the time and procedural risks of assembling and pre-cleaning devices

LISTED UNDER: Sampling Equipment
Advertisement

Automated Sampling System Monitors Pure Steam Quality

March 5, 2009 6:21 am | Product Releases | Comments

This closed system will extract, condense and isolate the condensate sample for removal in a sealed container for subsequent analysis. The hands-off auto sampling method eliminates potential contamination of the sample and minimizes risk of injury too operating personnel.

LISTED UNDER: Sampling Equipment

Sampling System Designed For Safe, Accurate Small-Volume Sampling Of High-Value Biotherapeutics

April 4, 2007 8:17 am | Product Releases | Comments

The NovaSeptum® AV (Accurate Volume) system is designed to meet the challenges of aseptic and sterile sampling.

LISTED UNDER: Sampling Equipment

Process Monitor

December 19, 2003 9:17 am | Product Releases | Comments

allows in-situ measurement in hostile conditions The EnviroCam Model 1100 permits viewing and recording of process developments in real time, providing a nonintrusive method to monitor a procedure without interruption.

LISTED UNDER: Sampling Equipment

Automatic Sampler

October 1, 2003 12:11 pm | Product Releases | Comments

for liquids or slurries ISOLOK automatic samplers draw measured portions of liquids or slurries on command from electrical or all-pneumatic controls. The sampler taps process streams moving through pipes or vessels pressurized up to 300 psi, as well as troughs or tanks.

LISTED UNDER: Sampling Equipment

High Density Feedthroughs

June 9, 2003 9:52 am | Product Releases | Comments

allow multiple wires to be installed through a single port High Density (HD) Feedthrough assemblies permit multiple insulated wires to be installed through a single port for chamber profiling and product validation in sterilizers, cryogenic chambers and freeze dryers.

LISTED UNDER: Sampling Equipment
X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading