This new industrial pipeline regulator is designed to exceed heavy heating, cutting pressure and...
Dual-Shaft Mixers deliver a balance of bulk flow agitation and high speed dispersion required in...
The ALpHA G is an absolute rated depth type prefilter, which has been optimized for compatibility with a gamma irradiation cycle commonly used to sterilize single-use systems.
Ready-to-go straight from the box, ÄKTA start is a compact, affordable protein purification system that removes the hassles of manual approaches and provides automated control of the purification procedure.
These Cryogenic Valves are suitable for high-pressure, low-temperature liquified natural gas, manufacturing, heat treating and vaporizing applications to -420F.
The patented sealless, magnetic drive design provides zero leakage for applications using sodium hypochlorite, ammonia, hydrogen peroxide, ferric chloride or aluminum chloride.
These cryogenic valves are suitable for high-pressure, low-temperature liquified natural gas (LNG), manufacturing, heat treating and vaporizing applications to -420F.
A new Dust Hood for Bulk Bag Dischargers contains spillage and dust that can escape through seams in the bag and folds in the spout.
Introducing sixteen low temperature circulators that provide precise temperature control for demanding external applications.
These microprocessor-controlled PCR workstations reduce risk of sample contamination during DNA/RNA amplification and manipulation.
This flexible, modular chain conveyor can be configured to wrap around machinery and equipment in the packaging, food, medical and assembly industries.
This new device is designed to meet the demand for more flask clamp sizes suitable for holding a wider variety of sample sizes.
This mechanical self-setting valve switch reduces calibration time, especially during instances of diaphragm change-out and valve commissioning.
The compact, multiport double weir design of this diaphragm valve provides for multiple flow paths while reducing contact surfaces and hold up volume.
This media containment device is an environmentally safe solution to the problem of valve leakage, especially in applications involving hazardous materials.
These 30-gallon dished-bottom agitated reactors for chemical processes and sanitary applications are each equipped with a top-entering impeller agitator, dip tube, multiple feed ports, removable thermowell and flush bottom ball valve.
Designed for the requirements of the food, packaging, chemical, pharmaceutical and plastics and rubber industries, these electromagnetic conveyors use a two-mass vibrating system powered by electromagnetic drives.
Introducing a high-efficiency, industrial, indirect-fired gas heater used to heat process air streams without contaminating the air with the products of combustion.
A full range of sanitary jacketed ball valves to meet specific needs in the pharmaceutical, cosmetic and food industries are now available.
New Cold Boxes and Air Conditioners are compact and portable, making them suitable for plants with limited floor space.
This mixing unit for hot and cold water allows the user to set the exact output water temperature desired from 80°F to 160°F.
This vacuum inlet trap is designed to protect central source vacuum systems in hospitals, university science buildings and research facilities.
These new extended life pneumatic actuators are ideal for 90° and 180° turn devices such as butterfly valves, ball valves, plug valves and damper valves.
This new jacketed reaction vessel offers control of reaction variables, a direct drive overhead stirrer and reaction visibility even with the vacuum jacket option.
These General Utility Pumps are a cost-effective solution for a range of applications from clean, clear liquids to abrasive and corrosive fluids.
This cleanable round airlock (CRA) was designed specifically for food, pet food and chemical industry applications, where equipment must meet challenging sanitary requirements.
- Page 1